Browse Categories
Print Instructions

Directions for using The Natural Solution for Hot Tubs

If you need help or advice please do not hesitate to give us a call

604-846-5606 or 604-798-1817

This is a two-step process. You need to remove all excess build-up of chemical residues and contaminants like hot tub chlorine and bromine, and other hot tub chemicals in your hot tub's system by using The All Natural Hot Tub Cleanser before using The Natural Solution.  The Hot Tub Cleanser is a one-time cleansing treatment; you don't need to do it again unless you neglect your tub for a long time.

If your hot tub is brand new you DO NOT need to do the cleansing process, just skip to step 2.

Step One: The All Natural Hot Tub Cleanser

1. DO NOT DRAIN YOUR HOT TUB.  Turn the temperature of the hot tub down to its coolest setting (this product works best in cool water).

 2. Remove your pleated filter(s) during the cleansing process.  You can clean them at this time using the All Natural Filter Cleaner.

3.  Pour 1 bottle of Hot Tub Cleanser into the hot tub and run the jets full speed for about 30 minutes. (If foaming occurs, do not be alarmed, this can happen).

4. Let the tub circulate on its normal filter cycle for 2 whole days.  You can, if you have the time, go out once a day and turn the jets on high for 30 minutes. This will help speed up the process.

5. Drain and clean the tub on the 3rd day.  After it is drained, flush the system by running water down the filter well. This will flush out the motor and the pipes. Also, lightly run water back through the jets to flush out the jet lines. Just ensure that all of the old water is out of the system. When you clean the tub, just use some diluted bleach in a bucket (a cup or two out of the bottle of bleach is fine) and an old rag to wipe the whole tub.  Wipe the underside of the cover really well. Also, hose out the inside of the cover by undoing the zipper and spraying the hose inside to flush it out. If you have headrests take them off and clean them and underneath them.  Also wipe down inside the filter housing, and all the jets.

6.  After the tub has been cleaned, refill the tub using the Carbon Block Pre-filter.

The water used to fill a spa is not as pure as you may like to think. There are impurities such as bacteria, water mold, copper, iron, calcium and other deposits which can be harmful to you, your family and your spa. The Carbon Pre-Filter allows you to enjoy a spa using water with filtration down to 0.5 micron. The human eye can detect up to 40 microns. This is the best spa and pool filter on the market. It is designed to remove the majority of the metals and minerals from your water, giving you cleaner, softer water. The Carbon Block Pre-filter is recommended to all customers no matter how good you think your water is. Using this Pre-filter will ensure clean, fresh water causing you fewer problems. Attach the Pre-Filter to your garden hose (flush for 30 seconds) and begin to fill.

Step Two: The Natural Solution 3 Month Hot Tub Water Treatment.

1.  After you have filled the tub using the Carbon Block Pre-filter and heated it up to normal operating temperature, add 1 bottle of The Natural Solution 3 Month Hot Tub Water Treatment for tubs up to 2000 liters.

2. Check and adjust your pH if needed.  Check your pH and alkalinity occasionally to make sure they are still in ideal ranges.  Tip: always turn your jets on high for at least 30 seconds before testing hot tub water. You want the pH to be from 7.8 to 8.0. If it is out of these ranges you will need to adjust it. Do not exceed 3 application of pH up or down in a day, sometimes it takes awhile to react. Once you have the pH in the 7.8 to 8.0 range, The Natural Solution will automatically stabilize it and you shouldn't have to balance it again until the next time you drain and refill your tub. If you have any questions feel free to give me a call.

3. Clean your filters once a month by putting the filter in a bucket of cold water and adding 2oz of the All Natural Filter Cleaner.

4. ENJOY the easiest, lowest maintenance, all natural enzyme hot tub treatment.

 

 

WEEKLY MAINTENANCE:

 1.  Hose your filter off really well every week.  Use a hose nozzle like the Filter Flosser with a strong jet.  This is one of the best things you can do for the maintenance of the hot tub.  Do this at least once a week.  It is real easy and only takes a few minutes.

2.  Shock as needed.  (use 2 tablespoons of 99% DiChlor  for up to 2000 liters of water).  After putting in the 2 tablespoons of 99% DiChlor leave the lid open and turn your jets on high, this will help it dissipate out of the water really fast so you’re not sitting in any chemicals when you get in your hot tub.

3.  What I do is pick a day of the week when you want to do your maintenance (developing a routine is really important).  If you do the maintenance in the MORNING, first hose off the filters with the Filter Flosser, and add 2 tablespoons 99% DiChlor, leave the hot tub cover open and turn your jets on high, the chlorine will gas out in a couple of hours and is ready for use that evening. If you do the maintenance at night when you get out of the tub just hose the filter off and shock with 2 tablespoons of the 99% DiChlor, then close the lid and the shock will be gassed out  by the following evening.

7. Clean your Filters once a month with the All Natural Filter Cleaner.

Helpful Tips for using the 3 month Hot Tub Water Treatment.

1. Fragrances... are usually used to mask chemical odors, and a lot of these have chemicals in them as well.  The over use of fragrances may cause foaming and/or cloudy water.  If this happens shock with 2 tablespoons of         99% DiChlor and clean your filters.

2. If you ever experience a stale or an organic odor coming from your spa water, this simply means The Natural Solution has found contaminants and is working harder.  Sometimes this odor might be coming from the cover or headrests, wipe these down with a diluted bleach solution and an old rag.  If this doesn't solve the problem shock the water with 2 tablespoons of 99% DiChlor.  If the problem persists,  it might need a stronger shock, use another tablespoon or so of the shock and that should take care of it. Just allow sufficient time for the shock to burn off before getting back into the tub.

3. The Natural Solution is compatible with ozonators, chlorine and bromine. We highly recommend using only 99% DiChlor as a shock.  Don't use bromine.   *Health Canada recommends 3 ppm chlorine or bromine.

4. Cloudy water may be caused by a large number of bathers, lotions, oils, deodorants, sunscreens or other products used on the skin or soap residues in bathing suits.  If you get cloudy water hose your filters off really well with the Filter Flosser, if this doesn't take care of it shock with 2 tablespoons of the 99% DiChlor.  Be patient. The spa water will clear up and does not have to be drained if the water is cloudy; The Natural Solution just needs some time to do its job.

5. If your spa water has a high metal content and/or if your water source is from a well we highly recommend the use of a Carbon Block Pre-Filter.  The pre-filter will filter out most of the metals from the water.  If you still have high metal you can use a “Metal B Gone” or a “Stain and Scale” product from you local hot tub store.

6. Rinse your filters at least once week with the Filter Flosser.  The filter is the most important part of your hot tub.  Clean your filters at least once a month with the All Natural Filter Cleaner. I highly recommend getting an extra set of filters so you can use the rotation method of cleaning your filters.  This way you will always have a clean filter available when you need to clean the one in the hot tub.  Just pull the dirty filter out of the hot tub, hose off thoroughly with the Filter Flosser, and soak it in a bucket of cold water and 2oz of the All Natural Filter Cleaner.  Put your clean filter in the hot tub.  When the dirty filter is done soaking, pull it out and hose it off really well, then put it on the shelf to dry, it will be ready for the next time you need to change them out.  This method makes cleaning your filters much easier.

7. Foam is almost always a result of soap left in bathing suits. I recommend that you designate a set of swimsuits just for the hot tub. When you get out of the tub, just hang them to dry. The Natural Solution will not ruin swimsuits.  To get rid of the foam you can use a defoamer product  from the hot tub store, but usually all you need to do is skim it off and rinse your filters a couple times.  Don't use soap on your skin when bathing before entering your spa. This will introduce phosphates to your water and will cause foaming as well.

If you have any questions or problems, please do not hesitate to give me a call.

Rickie Ruch—Owner    Office-- 604-846-5606     Cell-- 604-798-1817

Email-- rick@thenaturalsolution.ca    Website-- www.thenaturalsolution.ca

“Like us on Facebook at The Natural Solution.ca”

.